PR-01EPset PR-01 EP set Bridge SetAdd to Wish List
PR-01 EP titanium saddles are pre-assembled on a zinc die cast base. Epiphone bridges are manufactured by several different factories in several Asian countries, so there are some spec variations for many models. Therefore we decided to prepare the bridge...
PR-01set PR-01 Vintage ABR-1 Style Bridge SetAdd to Wish List
PR-01 titanium saddles are pre- assembled with zinc die cast base. This bridge base is not Gibson®'s original parts. But it can be used as a replacement for the original Vintage ABR-1 Bridge. Also you can use this bridge on...
PR-02 Vintage ABR-1 Tune-O-Matic BridgeAdd to Wish List
Designed to match Gibson®'s original bridge, “BR-010”. As with the original parts, the string groove is not filed. After applying saddle to bridge base, trim it to match strings pitch. You can use regular file for trimming but we recommend...
PR-04 Synchronized Tremolo Bridge Saddles - 2 1/8" SpacingAdd to Wish List
This press-saddle is designed to mach the Japanese synchronized tremolo bridges made by Gotoh® and others. The string pitch is 10.8m/m. PR-04 Specs
PR-05 Gotoh® Tune-O-Matic BridgeAdd to Wish List
Designed to match GE-103B, GE-103BT which is made by GOTOH® (Japanese parts manufacturer) Gotoh bridges are often used as replacement parts for relatively expensive models made by guitar manufacturers. String groove is pre-filed on center of the saddle. PR-05 Specs
PR-06 Gibson® Nashville Style T-O-M BridgeAdd to Wish List
Designed to match Gibson®’s original bridge: “BR-030”. As with the original parts, it has not been manufactured with a string groove. After applying saddle to bridge base, trim it to match strings pitch. You can use regular file for trimming...
PR-06set PR-06 set Nashville Style Bridge SetAdd to Wish List
PR-06 titanium saddles are pre-assembled with zinc die cast base. This bridge base is not Gibson®'s original parts. But it can be used as a replacement for the original Nashville Tune-O-Matic Bridge. Also you can use this bridge on some...
PR-08 For Tele 3pcs. style BridgeAdd to Wish List
Two-string per saddle model for the Telecaster® manufactured by Fender Japan®. Strings pitch is 10.8m/m. It can be attached to the USA manufactured Telecaster® as well. A slight string groove has been manufactured directly on the saddle. The screw is...
PR-08Quattro For Tele 3pcs. style Bridge '68 styleAdd to Wish List
Saddles from late 1954 were the plain steel barrel type with no grooves. They were .250” in diameter. After mid 1958 the plain steel saddles were replaced by the .250” diameter threaded saddles that remained a standard part until sometime...
PR-08WD For Tele 3pcs. style (slant)Add to Wish List
Facing in the string direction, the saddle adjusts obliquely to improve the octave tuning function which has previously been the drawback with the standard two-strings-per saddle model saddles. Stability improves for high position chords as well. It can be attached...
PR-11 Synchronized Tremolo Bridge (USA Style) - 2 7/32" SpacingAdd to Wish List
Designed to match Stratocasters® made in USA and Mexico. The screw pich follows "Inch" standard. PR-11 Specs
PR-14 Synchronized Tremolo Bridge - Narrow 2 1/16" SpacingAdd to Wish List
This narrower pitch (.413in) saddle is compatible with PRS and most of guitars made in Asia. PR-14 Specs
PR-15 Synchronized Tremolo Bridge (Offset Style) - 2 1/16" SpacingAdd to Wish List
This offset type saddle can be used for US made Standard Stratocasters® and Strat® Plus. PR-15 Specs
PR-18 Block Style Saddles - 2 1⁄8" SpacingAdd to Wish List
Introducing our new block style saddles PR-18 which have 10.8mm pitch to fit Gotoh 510, GE1088,1089 etc. The new PR-18 can be installed perfectly on 10.8mm pitch (2.125" E to E spacing) bridge without any gap between the saddles. PR-18...
PR-Mu 6piece Mustang®, Jaguar®, Jazz Master® style saddlesAdd to Wish List
There are no height screws in the saddles and each saddle is a different diameter so that they sit at different heights to compensate for the fingerboard radius. The Fender original Mustang saddles are assembled into the bridge loosely. Our...
Ti-Block-G / Insert Block for Gotoh® GE1996T TremoloAdd to Wish List
The size specifications match Gotoh® GE1996T Tremolo.
Titanium Neck Reinforcement BarAdd to Wish List
After repeating the cold rolling process several times, these titanium rods become the perfect hardness for guitar reinforcements. By placing two of these on both sides of the truss rod, they will greatly reinforce the neck strength as well as...